Maintenance * | Hot Racing Pro Connector Soldering Jig

Hot Racing Pro Connector Soldering Jig.

Features:

• Ideal For Soldering And All Types Rc Connector
• This Jig Quickly And Securely Clamps, Holds, And Releases These Connectors For Your Soldering Tasks.
• This Jig Clamp Holds The Most Rc Connectors
• Xt60
• Deans T Connector
• Traxxas Connector
• Ec-2 To Ec-5
• Deans Micro 2Pin To 4Pin Connectors
• Bullet Connectors From 2 To 6.5 Mm
• Magnetic Two Piece Design With Alligator Clips And Solder Storage
• Two Alligator Clips Style Holding Clamps For Wire.
• Wide Aluminum Base For Added Stability
• Can Be Use As Motor Holder Fit Both 5Mm And 1/8 Motor Shaft.

Soldering Tip:
1) Soldering Iron Must Be Very Hot!
2) Tin The Wires And The Connector Pins With 60/40 Electrical Solder
3) Now Place The Wire And Connector Pin Together With The Help Of A Very Hot Soldering Tip So The Solder On Both Items Melts
4) Then Remove The Soldering Tip From The Solder Join, And Let It Cool Done

Warning: Use Care When Soldering Battery Connectors. The Open Positive And Negative Wires Could Create A Short Circuit.

• Keep One Of The Wires Properly Isolated At All Times.
• Only Clamp On One Pin At A Time From The Same Battery.

This Product Was Added To Our Catalog On February 1, 2018